GfG Gesellschaft für Gerätebau mbH
Klönnestraße 99
44143 Dortmund, Germany
Phone: +49-231 56 40 00
Fax: +49-231 51 63 13
http://www.gasmessung.de
|
||||||||||||||||||||
|
||||||||||||||||||||
Die MICRO IV-Dockingstation DS220 ist ein komplettes Gerätemanagementsystem, das Kosten und Zeitaufwand für Funktionstest (Bump-Test), Justierung und Dokumentation erheblich reduziert und eine schnelle Betriebsbereitschaft der Geräte gewährleistet.
Link to further Information
A fixed gas detection system permanently monitors the work environment for possible gas hazards, ensuring maximum safety. Even the smallest gas leak will trigger an alarm to enable action to be taken. More than 500 different gases and vapours can be monitored with GfG fixed systems.
A fixed system consists of a transmitter and controller. These controllers can be connected as single-channel systems for just 1 transmitter, up to 8-channels for 1 controller – or with a rack mounted system as many transmitters as are required.
Link to further Information
Der kleinste Alleskönner
Das Mehrgas-Messgerät G460 für brennbare Gase und Dämpfe, Sauerstoff sowie toxische Gase sorgt durch seine 4-Strahl-Infrarot-Technologie (NDIR) und dem Photoionisationsdetektor (PID) für einen optimalen Rundum-Schutz. Diese technische Innovation erlaubt es dem Anwender SIEBEN Gase gleichzeitig zu messen.
To ensure the highest levels of personal safety, GfG develops compact, robust and high quality portable instruments. Electrochemical, catalytic, infrared or PID sensors are used to detect all gas hazards which may be present in the work area.
GfG offers solutions for every application, from 1-gas to up to 7-gases at the same time. Very loud audible alarms, high visibility flashing and multi-colour visual alarms and vibration alarms are used to ensure that the worker is immediately alerted to gas hazards even in dark and noisy environments. Long sensor lifetime, low cost of ownership, ease of use and high quality are all trademarks of GfG portable gas detectors.
Link to further Information
The new G400-MP2 pump communicates with the G460. This interaction allows fault indication via the detector display.
Low battery, blocked sampling line or interrupted power fault modes are shown on the display and activate different visual and audible warnings.
Zur Umsetzung der steigenden Anforderungen im täglichen Einsatz von Gaswarngeräten hat GfG auf Basis der bewährten Dockingstation DS400 die Teststation TS400 zur Durchführung des arbeitstäglichen Anzeigetests mit Gas entwickelt. Die Teststation ermöglicht einen kostengünstigen, flexiblen und ortsunabhängigen Einsatz.
Der Anzeigetest dauert nur 20 Sekunden: Das eingelegte Gasmessgerät wird automatisch auf die korrekte Funktion der Sensoren und die richtige Auslösung der Alarme überprüft. Damit sind die Gaswarngeräte in kürzester Zeit wieder einsatzbereit und die Überprüfung ist sicher dokumentiert. So werden die laufenden Betriebskosten erheblich gesenkt und das Risiko minimiert: Gasverbrauch, Testzeiten und Aufzeichnungsdauer der Dokumentation reduzieren sich auf ein Minimum. Eine arbeitstägliche Überprüfung des Microtector II kostet somit weniger als 50 Cent!
Link to further Information
Measuring and monitoring liquids in different engineering circuits is the field we are involved in day by day. Whether in sewage treatment, water treatment, swimming pools, chemical plants, refrigeration installations or the food industry - each medium imposes its own specific measuring requirement. Minimal impurities can harm human beings, products or equipment.
Link to further Information
The GMA100 and GMA300 series are rack-mounted microprocessor-based control and monitoring systems for all measurement tasks. Depending on the transmitter connected, the GMA100 or GMA300 series form a discrete gas detection system for detection of toxic, oxygen or flammable gases. The wide variety of functions and high degree of flexibility available mean that the systems can be adapted for all gas detection tasks. 3 alarm thresholds per can be set per detector. Additional relay and alarm functions are available.
Link to further Information
The systems included flexible, cost-effective control units for DIN-rail mounting. The controllers can be clipped directly on to standard DIN rails in switchgear cabinets. As many controllers as required can be plugged together, so that voltage supply and alarms can be connected without additional wiring.
Link to further Information
Switchgear cabinets or additional housings are not necessary. Together with the appropriate transmitters, GMA80 series controllers provide a complete fixed gas detection system for a wide range of different flammable and toxic gases, and oxygen. All transmitter types can be attached. The GMA80 series controllers supply the attached transmitters with power and process input signals received. The controllers support 2- and 3-wire inputs and supply power to the attached transmitters. Multiple measuring points can be monitored at the same time.
Link to further Information
Complete transmitter and controller in one unit
The GMA36 Pro is an intelligent and flexible measuring system, simply wall mounted. Toxic gases, oxygen and hydrogen are monitored continuously and reliably.
Link to further Information
In all areas where flammable gases or vapours are found, explosive gas mixtures can accumulate unexpectedly and very quickly. Regulations from the supervisory authorities, and the operator’s responsibility for the protection of people and plant demand continuous monitoring of the area.
Link to further Information
Oxygen is essential for human life. The oxygen concentration in normal air should be 20.9% by volume. Under normal conditions, fluctuations in this important oxygen concentration are extremely small. The human body is very sensitive to changes in the level of oxygen in breathing air. Oxygen deficiency leads to tiredness as one of the first symptoms. This means that the operator’s efficiency and safety while operating plant and machinery is quickly impaired. A decrease of oxygen concentration of only 5 % can cause breathing difficultly and damage to health.
Link to further Information
In many areas gas is often used in processes, or stored, shipped and produced as a by-product in certain industrial applications. Often, these gases are toxic and dangerous to health. Additionally, most toxic gases (e.g. carbon monoxide CO) are not detected by sight, taste or smell. The smallest concentrations can cause acute toxic shock and even permanent damage to health. To detect toxic gases, GfG uses different sensor technologies.
Link to further Information
Die innovative Dockingstation DS400 ist ein komplettes Gerätemanagementsystem, das Kosten und Zeitaufwand für Justierung und Dokumentation erheblich reduziert und eine schnelle Betriebsbereitschaft des Gerätes gewährleistet.
Die Station kann an jedem Ort aufgestellt werden und benötigt nur wenig Platz. Es ist kein PC-Anschluss oder Modul erforderlich. Jede Dockingstation arbeitet vollkommen unabhängig.
Link to further Information
The GMA100 and GMA300 series are rack-mounted microprocessor-based control and monitoring systems for all measurement tasks. Depending on the transmitter connected, the GMA100 or GMA300 series form a discrete gas detection system for detection of toxic, oxygen or flammable gases. The wide variety of functions and high degree of flexibility available mean that the systems can be adapted for all gas detection tasks. 3 alarm thresholds per can be set per detector. Additional relay and alarm functions are available.
Link to further Information
The systems included flexible, cost-effective control units for DIN-rail mounting. The controllers can be clipped directly on to standard DIN rails in switchgear cabinets. As many controllers as required can be plugged together, so that voltage supply and alarms can be connected without additional wiring.
Link to further Information
Together with the appropriate transmitters, GMA80 series controllers provide a complete fixed gas detection system for a wide range of different flammable and toxic gases, and oxygen. All transmitter types can be attached. The GMA80 series controllers supply the attached transmitters with power and process input signals received. The controllers support 2- and 3-wire inputs and supply power to the attached transmitters. Multiple measuring points can be monitored at the same time.
Link to further Information
The Micro III is the perfect solution for monitoring toxic gases and vapours and oxygen. Neither dust nor water can enter the casing (protection IP56). A built-in clip secures the Micro III safely to a belt or pocket. The ABS enclosure provides 3 metal layers, which make it extremely shock and scratch resistant. The Micro III is of course approved for use in explosion-endangered areas.
State-of-the-art sensor technology guarantees a long lifetime of the pre-calibrated sensors and results in reduced cost of ownership. The intelligent sensor plug in and can easily be replaced by the user.
Link to further Information
Single-Gas Detector
The small and light Single-gas detectors are the perfect solution for monitoring toxic gases and vapours and oxygen. They belong to the personal safety equipment and can be carried directly at the user's clothing without handicap. The detectors are approved for use in Ex-areas and with 75g extremely lightweight . The ABS enclosure is water-protected (IP56) and extremely shock- and scratch resistant.
Link to further Information
4-Gas detector
This robust 4-Gas detector measures up to 4 gases simultaneously: Oxygen (O2), hydrogen sulphide (H2S), carbon monoxide (CO) and cumbustible gases (CH4). It was developed especially for personal protection against gas hazards and is carried at the working clothes. A large, coloured graphic display provides clear readings of all data. The display can be turned 180° by just pushing a button – this allows the display to be read easily even if the detector is carried at the belt. The zoom function allows an easy reading of single measuring values and shows additional information on the selected gas. Hands free for maximum safety.
Link to further Information
7-Gas detector
This light and robust gas detector is the development of the proven Microtector II G450. The key features are retained – smart, interchangeable sensor technology, low cost of ownership - but extra functionality is now added.
The Microtector II G460 measures up to 7 gases simultaneously in ambient air for increased workplace safety. The sensor slots can be equipped individually. Different detection principles are available for optimal measuring results. The Microtector II G460 is the smallest detector world-wide which can be equipped with both an infrared sensor and a PID.
Link to further Information
Im Gegensatz zur Pumpe G400-MP1 kommuniziert die neue MP2 mit dem G460. Dieses Zusammenspiel ermöglicht eine Störmeldung direkt über das Gerätedisplay.
Nachlassende Batterieleistung, Blockieren des Ansaugweges oder Unterbrechung des internen Motorstromkreises werden im Display angezeigt und lösen einen differenzierten optischen und akustischen Alarm aus.
Link to further Information
Zur Umsetzung der steigenden Anforderungen im täglichen Einsatz von Gaswarngeräten hat GfG auf Basis der bewährten Dockingstation DS400 die Teststation TS400 zur Durchführung des arbeitstäglichen Anzeigetests mit Gas entwickelt. Die Teststation ermöglicht einen kostengünstigen, flexiblen und ortsunabhängigen Einsatz.
Für den sicheren Transport von Prüfgasflasche, Entnahmearmatur, Teststation, Netzteil, Kfz-Adapter und Gasmessgerät ist ein Spezialkoffer entwickelt worden. Alle Teile haben ihren festen Platz - kein Verrutschen, kein Klappern, kein Kabelgewirr. Der Schaumstoffeinsatz ist genau auf die GfG-Produkte zugeschnitten.
Link to further Information
The Micro III is the perfect solution for monitoring toxic gases and vapours and oxygen. Neither dust nor water can enter the casing (protection IP56). A built-in clip secures the Micro III safely to a belt or pocket. The ABS enclosure provides 3 metal layers, which make it extremely shock and scratch resistant. The Micro III is of course approved for use in explosion-endangered areas.
State-of-the-art sensor technology guarantees a long lifetime of the pre-calibrated sensors and results in reduced cost of ownership. The intelligent sensor plug in and can easily be replaced by the user.
Link to further Information
Single-Gas Detector
The small and light Single-gas detectors are the perfect solution for monitoring toxic gases and vapours and oxygen. They belong to the personal safety equipment and can be carried directly at the user's clothing without handicap. The detectors are approved for use in Ex-areas and with 75g extremely lightweight . The ABS enclosure is water-protected (IP56) and extremely shock- and scratch resistant.
Link to further Information
4-Gas detector
This robust 4-Gas detector measures up to 4 gases simultaneously: Oxygen (O2), hydrogen sulphide (H2S), carbon monoxide (CO) and cumbustible gases (CH4). It was developed especially for personal protection against gas hazards and is carried at the working clothes. A large, coloured graphic display provides clear readings of all data. The display can be turned 180° by just pushing a button – this allows the display to be read easily even if the detector is carried at the belt. The zoom function allows an easy reading of single measuring values and shows additional information on the selected gas. Hands free for maximum safety.
Link to further Information
7-Gas detector
This light and robust gas detector is the development of the proven Microtector II G450. The key features are retained – smart, interchangeable sensor technology, low cost of ownership - but extra functionality is now added.
The Microtector II G460 measures up to 7 gases simultaneously in ambient air for increased workplace safety. The sensor slots can be equipped individually. Different detection principles are available for optimal measuring results.
The Microtector II G460 is the smallest detector world-wide which can be equipped with both an infrared sensor and a PID.
Link to further Information
Complete transmitter and controller in one unit
The GMA36 Pro is an intelligent and flexible measuring system, simply wall mounted. Toxic gases, oxygen and hydrogen are monitored continuously and reliably.
Link to further Information
The transmitter CS21 uses the proven chemosorption principle for detection of toxic and combustible gases and vapours. The extremely short response time of the transmitter enables the user to take action quickly to prevent damage to people and plant. Long sensor life makes the CS21 an economic alternative.
The sensor can often be used continuously for 5 years, before replacement is required. A wide temperature range from -40°C to + 60 °C makes the CS21 useful for a variety of applications, particularly for the protection of refrigeration plants.
Link to further Information
Where gas hazards are found, the proven EC24 is an optimal solution for the safe monitoring of rooms and plant areas. ATEX-certified construction also ensures safe operation even in hazardous areas containing flammable risks.
Link to further Information
Wherever gas hazards are to be found, the EC28 provides the best solution for safe monitoring. ATEX-certified design, built-in EX-certified horn and bright LED lights allow safe operation. The gas alarm is transmitted to the central control panel, simultaneously warning the control room and the worker in the danger area.
Link to further Information
The GMA100 and GMA300 series are rack-mounted microprocessor-based control and monitoring systems for all measurement tasks. Depending on the transmitter connected, the GMA100 or GMA300 series form a discrete gas detection system for detection of toxic, oxygen or flammable gases. The wide variety of functions and high degree of flexibility available mean that the systems can be adapted for all gas detection tasks. 3 alarm thresholds per can be set per detector. Additional relay and alarm functions are available.
Link to further Information
The systems included flexible, cost-effective control units for DIN-rail mounting. The controllers can be clipped directly on to standard DIN rails in switchgear cabinets. As many controllers as required can be plugged together, so that voltage supply and alarms can be connected without additional wiring.
Link to further Information
Together with the appropriate transmitters, GMA80 series controllers provide a complete fixed gas detection system for a wide range of different flammable and toxic gases, and oxygen. All transmitter types can be attached. The GMA80 series controllers supply the attached transmitters with power and process input signals received. The controllers support 2- and 3-wire inputs and supply power to the attached transmitters. Multiple measuring points can be monitored at the same time.
Link to further Information
Complete transmitter and controller in one unit
The GMA36 Pro is an intelligent and flexible measuring system, simply wall mounted. Toxic gases, oxygen and hydrogen are monitored continuously and reliably.
Link to further Information
In all areas where flammable gases or vapours are found, explosive gas mixtures can accumulate unexpectedly and very quickly. Regulations from the supervisory authorities, and the operator’s responsibility for the protection of people and plant demand continuous monitoring of the area.
Link to further Information
Oxygen is essential for human life. The oxygen concentration in normal air should be 20.9% by volume. Under normal conditions, fluctuations in this important oxygen concentration are extremely small. The human body is very sensitive to changes in the level of oxygen in breathing air. Oxygen deficiency leads to tiredness as one of the first symptoms. This means that the operator’s efficiency and safety while operating plant and machinery is quickly impaired. A decrease of oxygen concentration of only 5 % can cause breathing difficultly and damage to health.
Link to further Information
In many areas gas is often used in processes, or stored, shipped and produced as a by-product in certain industrial applications. Often, these gases are toxic and dangerous to health. Additionally, most toxic gases (e.g. carbon monoxide CO) are not detected by sight, taste or smell. The smallest concentrations can cause acute toxic shock and even permanent damage to health. To detect toxic gases, GfG uses different sensor technologies.
Link to further Information
A fixed gas detection system permanently monitors the work environment for possible gas hazards, ensuring maximum safety. Even the smallest gas leak will trigger an alarm to enable action to be taken. More than 500 different gases and vapours can be monitored with GfG fixed systems.
A fixed system consists of a transmitter and controller. These controllers can be connected as single-channel systems for just 1 transmitter, up to 8-channels for 1 controller – or with a rack mounted system as many transmitters as are required.
Link to further Information
To ensure the highest levels of personal safety, GfG develops compact, robust and high quality portable instruments. Electrochemical, catalytic, infrared or PID sensors are used to detect all gas hazards which may be present in the work area.
GfG offers solutions for every application, from 1-gas to up to 7-gases at the same time. Very loud audible alarms, high visibility flashing and multi-colour visual alarms and vibration alarms are used to ensure that the worker is immediately alerted to gas hazards even in dark and noisy environments. Long sensor lifetime, low cost of ownership, ease of use and high quality are all trademarks of GfG portable gas detectors.
Link to further Information
Measuring and monitoring liquids in different engineering circuits is the field we are involved in day by day. Whether in sewage treatment, water treatment, swimming pools, chemical plants, refrigeration installations or the food industry - each medium imposes its own specific measuring requirement. Minimal impurities can harm human beings, products or equipment.
Link to further Information
The GMA100 and GMA300 series are rack-mounted microprocessor-based control and monitoring systems for all measurement tasks. Depending on the transmitter connected, the GMA100 or GMA300 series form a discrete gas detection system for detection of toxic, oxygen or flammable gases. The wide variety of functions and high degree of flexibility available mean that the systems can be adapted for all gas detection tasks. 3 alarm thresholds per can be set per detector. Additional relay and alarm functions are available.
Link to further Information
Simple installation and control
The systems included flexible, cost-effective control units for DIN-rail mounting. The controllers can be clipped directly on to standard DIN rails in switchgear cabinets. As many controllers as required can be plugged together, so that voltage supply and alarms can be connected without additional wiring.
Link to further Information
Switchgear cabinets or additional housings are not necessary
Together with the appropriate transmitters, GMA80 series controllers provide a complete fixed gas detection system for a wide range of different flammable and toxic gases, and oxygen. All transmitter types can be attached. The GMA80 series controllers supply the attached transmitters with power and process input signals received. The controllers support 2- and 3-wire inputs and supply power to the attached transmitters. Multiple measuring points can be monitored at the same time.
Link to further Information
Complete transmitter and controller in one unit
The GMA36 Pro is an intelligent and flexible measuring system, simply wall mounted. Toxic gases, oxygen and hydrogen are monitored continuously and reliably.
Link to further Information
In all areas where flammable gases or vapours are found, explosive gas mixtures can accumulate unexpectedly and very quickly. Regulations from the supervisory authorities, and the operator’s responsibility for the protection of people and plant demand continuous monitoring of the area.
Link to further Information
Oxygen is essential for human life. The oxygen concentration in normal air should be 20.9% by volume. Under normal conditions, fluctuations in this important oxygen concentration are extremely small. The human body is very sensitive to changes in the level of oxygen in breathing air. Oxygen deficiency leads to tiredness as one of the first symptoms. This means that the operator’s efficiency and safety while operating plant and machinery is quickly impaired. A decrease of oxygen concentration of only 5 % can cause breathing difficultly and damage to health.
Link to further Information
In many areas gas is often used in processes, or stored, shipped and produced as a by-product in certain industrial applications. Often, these gases are toxic and dangerous to health. Additionally, most toxic gases (e.g. carbon monoxide CO) are not detected by sight, taste or smell. The smallest concentrations can cause acute toxic shock and even permanent damage to health. To detect toxic gases, GfG uses different sensor technologies.
Link to further Information
The GMA100 and GMA300 series are rack-mounted microprocessor-based control and monitoring systems for all measurement tasks. Depending on the transmitter connected, the GMA100 or GMA300 series form a discrete gas detection system for detection of toxic, oxygen or flammable gases. The wide variety of functions and high degree of flexibility available mean that the systems can be adapted for all gas detection tasks. 3 alarm thresholds per can be set per detector. Additional relay and alarm functions are available.
Link to further Information
Simple installation and control
The systems included flexible, cost-effective control units for DIN-rail mounting. The controllers can be clipped directly on to standard DIN rails in switchgear cabinets. As many controllers as required can be plugged together, so that voltage supply and alarms can be connected without additional wiring.
Link to further Information
Switchgear cabinets or additional housings are not necessary
Together with the appropriate transmitters, GMA80 series controllers provide a complete fixed gas detection system for a wide range of different flammable and toxic gases, and oxygen. All transmitter types can be attached. The GMA80 series controllers supply the attached transmitters with power and process input signals received. The controllers support 2- and 3-wire inputs and supply power to the attached transmitters. Multiple measuring points can be monitored at the same time.
Link to further Information
Complete transmitter and controller in one unit
The GMA36 Pro is an intelligent and flexible measuring system, simply wall mounted. Toxic gases, oxygen and hydrogen are monitored continuously and reliably.
Link to further Information
In all areas where flammable gases or vapours are found, explosive gas mixtures can accumulate unexpectedly and very quickly. Regulations from the supervisory authorities, and the operator’s responsibility for the protection of people and plant demand continuous monitoring of the area.
Link to further Information
Oxygen is essential for human life. The oxygen concentration in normal air should be 20.9% by volume. Under normal conditions, fluctuations in this important oxygen concentration are extremely small. The human body is very sensitive to changes in the level of oxygen in breathing air. Oxygen deficiency leads to tiredness as one of the first symptoms. This means that the operator’s efficiency and safety while operating plant and machinery is quickly impaired. A decrease of oxygen concentration of only 5 % can cause breathing difficultly and damage to health.
Link to further Information
In many areas gas is often used in processes, or stored, shipped and produced as a by-product in certain industrial applications. Often, these gases are toxic and dangerous to health. Additionally, most toxic gases (e.g. carbon monoxide CO) are not detected by sight, taste or smell. The smallest concentrations can cause acute toxic shock and even permanent damage to health. To detect toxic gases, GfG uses different sensor technologies.
Link to further Information
Please wait
