Manage stand orders
Select Option

IST Isci Sagligi Techizati Co., Ltd.

P.O. Box 42, 06374 Ankara
Ostim Mah. Ivedik OSB 31. Cad. 2269. Sk No: 42 Yenimahalle, 06374 Ankara
Turkey
Telephone +90 312 3841300
Fax +90 312 3417303
info@ist.com.tr

Hall map

A+A 2019 hall map (Hall 6): stand H67

Fairground map

A+A 2019 fairground map: Hall 6

Contact

DORUK TURKUCAR

Export Manager

Ostim Mah. Ivedik OSB 31.Cad 2269.Sok No:42 Yenimahalle
06374 Ankara, Turkey

Phone
+905334750821

Fax
+903123417303

Email
doruk.t@ist.com.tr

Our range of products

Product categories

  • 01  Safety at work
  • 01.01  Personal protective equipment (PPE)
  • 01.01.16  Heat and fire-resistant clothing

Our products

Product category: Emergency showers

Self Contained Overhead Tank Showers

Overhead Tank Showers guarantee 15 minutes of water flow according to the standard requirements in bellow circumstances;

1. Without mains (water) supply connection 
2. In low water pressure 
3. Interruption of flow in existing water supply connection 

Different materials (Galvanized Steel, Stainless Steel, GRP) can be used in diffrent system parts as optionally.

You can customize your tank shower system by selection guide to integrate the system by choosen desired accessories and various system parts. 

Water Tanks are insulated. 

An integral immersion heater or a chiller unit can be added to the system with the options of ex-proof and non ex-proof, in order to keep the water temperature constant between 15-38 °C.

Heating and cooling capacities may be changed according to customer requirements.

OPTIONS

- Ex-proof Or Non Ex-proof Audible And Visual Alarm
- Ex-proof Or Non Ex-proof chiller cooling unit (for hot climates)
- Water Immersion Heather  (for cold climates)
- Scald Or Freeze Protection Valve
- Testing Lever
- Eyebath Foot Treadle
- Overhead ABS Shower Rose
- 316 Stainless Steel Shower Material  
- Overhead Sun Canopy
- Low Water Level Alarm 
- Side & Rear Panelling 
- Spring Loaded Doors 
- Visual Water Level Indicator
- Visual Water Temperature Gauge 
- Water Low And High Tempature Alarm
- Drain Sump and Grating 
- Internal or External lighting 
- Shower activation platform 
- Eyewash may be located internally on LHS or RHS or externally 
- LHS or RHS when wieved in front
- Ex-proof space heater
- Ex-proof  or non ex-proof flow switch 
- Pressure regulator
- Stainless steel erecting lugs 
- Thermo mixing valve 
- Wooden Pallets 
- M20 Electrical Box 
- Side and rear panels insulation / Water Tank insulation 
- Panic Bar / Push Bar
- Platform Activation

More Less

Product category: Emergency showers

Mobile Emergency Showers

The pressure tanks of the units are manufactured in accordance with the 2014/68 / EU directive.
Manufactured and certified in accordance with TS EN 13445: 2014 standard.
It contains CE mark.

Manufactured with 50 l water tank capasity as standard. 75 - 90 - 100 liters options are available.
Due to its compact design, does not require large storage space when it is not used. Large diameter wheels gives the system high maneuverability.
Works with compressed air.

Designed for areas where fixed emergency shower, eye/face wash systems can not be installed and/or for use during temporary work and where there may be various hazards.

The shower can be carried easily by one person, via its wheeled trolley system.

2” filling cap is included.

A regulator on the outlet of the water tank is included to ensure controlled and regular water flow.

In case of emergency, ventilated clean water is sprayed by pushing the valve handle. Manufactured with push handle control and fixed spray head as standard.

After each use, by repeating the water filling and air compressing processes continuous use of the system is ensured.

Standard Components of the System

1) 304 Stainless Steel Water Tank
2) Trolley (Material is galvanized steel)
3) 304 Stainless Steel Emergency Shower and Eye/ Face Wash
4) Water Pressure Reduce Valve
5) Air control valve

More Less

Product category: Emergency showers

Decontamination Units

Chemical, biological, radiological, and nuclear (CBRN) decontamination is the removal of CBRN material from equipments or humans. Decontamination Systems provide sanitation and decontamination to the people who exposed to chemical or biological agents, as well as to extinguish burning clothes.

OPTIONS

- Ex-proof or Non Ex-proof Audible And Visual Alarm
- Ex-proof or Non Ex-proof Lighting
- 316 Stainless Steel Material
- Water Pressure Regulator
- Flanged inlet
- Water tank
- Trailer or Skid mounted decontamination systems

More Less

Product category: Emergency showers

Spill Containment Systems

Spill Containment Pallet

Stainless Steel or Galvanized Steel material options
Production option in different volumes and sizes according to customer request
Different color options are available.

Heavy duty pallets for industrial applications
Ease of cleaning and draining
Keeps drums out of overflow

More Less

Product category: Emergency showers

Safety Storage & Carrying & Plunger & Bench Cans

Dispense flammable liquids and solvents safely, without waste or exposure

- Easy to carry and unfill spring cover mechanism 
- Durable and protective electro-static powder paint (in galvanized steel models)
- Polished and Shiny Surfaces (in stainless steel models)
- Reinforced body for impacts
- Bottom end, Seamed with Weld and reinforced with clamp
- Different models with different sizes

More Less

Product category: Heat and fire-resistant clothing

Aluminized Fire Proximity Suits

FYRAL Series aluminized fire proximity suits

EN 1486:2007 certified as per the latest directive. CE Marked.
MED Approval is available.

More Less

Product category: Heat and fire-resistant clothing

Fireman Suits

FYRPRO Series fire fighting suits

EN 469:2005 certified as per the latest directive. CE Marked.
MED Approval is available.

More Less

Product category: Heat and fire-resistant clothing

Electric Arc Protective Clothings

ELECTPRO Series arc flash suits

IEC 61482-2 certified as per the latest directive. CE Marked.
63 cal/cm2 ATPV value is available.

More Less

Product category: Heat and fire-resistant clothing

Molten metal splash protective clothings & Welding Suits

FYRTEX & FYRAL Series Heat and Flame Protective Clothing & Welders Clothing & Molten Metal Splash Protective Clothing & Antistatic Clothing

EN ISO 11612:2015, EN ISO 11611:2015, EN 1149-5:2008 certified as per the latest directive. CE Marked.

More Less

About us

Company details

Since 1979, we produce equipments for;

 
OCCUPATIONAL HEALTH AND SAFETY
FIRST AID  & CIVIL DEFENSE
FIRE & CBRN & PERSONAL PROTECTION.
 
Our headquarters and factory are located in Ankara. With our network of distributors spread all over the country and worldwide
we distribute our best and high quality service to  customers in the shortest time.
Our company has TS EN ISO 9001 Quality Certificate. All our products are certified according to international standards.
With the high quality products we manufacture, our export sales increase day by day.
 
 
What We Do at our Emergency Shower Division
 
We provide variety of special services you may need.
 
Engineering Consultation
IST provides complete information on the design, use, supply and care of emergency showers and eye/face wash fountains, safety storage and plunger cans, spill containment systems, decontamination systems and airline breathing systems. For all your needs during a new plant installation or facility renovation, our experienced team will guide you to the best and most economical solution.
 
Quality and Safe Product Selection
Our product range has a wide range of standard and optional designs. For interior and exterior applications, we offer high quality systems with heating or cooling, with freeze protection, portable or fixed special systems.
 
Special Engineering Solutions
Each shower is designed for different purposes and cannot substitute each other. In addition, standardized units with heating or cooling, may not always be the right choice for your needs. IST is fully equipped to offer and produce the special designed systems according to your needs. 
 
Adjusting Water Temperature
Tepid water supply (16 - 38 ° C), which is a requirement of both American and European standards, requires special attention. Our expert team has the capability to analyze resources of your facility and offer solutions to ensure that emergency showers and eye / face wash fountains will work properly under all circumstances. Our experts will work in coordination with your design or expert team.
 
Pre-Sales Solid Modelling and Technical Drawing
We provide customized design and engineering solutions to customers with our advanced three-dimensional solid modelling software. In this way, our customers can more easily analyze the suitability of the product to their facility and can plan the project accordingly. Two or three  dimensional detailed technical drawings are available for all our products. 
 
After-Sales Support
Our expert technicians can evaluate your existing emergency shower and eye/face wash fountain systems to  ensure compliance with ANSI and EN Standards. Our expert team will assist you about training and product setup for your new emergency shower.
All our products are guaranteed against production and workmanship defects for a period of 24 months.
 
 
What We Do at our Protective Clothings Division 

We provide variety of special services you may need.
 
Consultation
IST provides complete information on the design, use, supply and care of industrial heat and flame protective workwear / underwear / balaclavas, electric arc protective clothings, fireman suits, aluminized fire proximity/entry suits, air cooled kiln entry clothings, functional and thermal underwears/t-shirts. Our experienced team will provide you the best economical solution with customized size dimensions, preliminary study and technical drawings.
 
Quality and Safe Product Selection
Our product range has a wide range of standard and optional designs. We provide special protective clothing solutions suitable for work areas, that do not compromise protection while providing ease of movement. 
 
Special Engineering Solutions
Each garment is designed for different purposes and has different certificates. A protective garment cannot substitute another.  The most suitable and most appropriate solution must be determined according to the protection level and area of use. In IST® textile production workshop, fabrics are cut by using licensed cloth spreading  software to combine the best designs with the best stitching properties with same pattern in all sizes and to prevent the possibility of encountering an error. IST® is fully equipped to offer and produce standard and special designed garments according to your needs.
 
Complementary Accessories Selection
Complementary elements of protective clothing are of great importance for full protection. You can easily choose and gather the most suitable complementary materials that can be specially used with the protective clothing you purchased such as; personal protective equipments like head, face, hand, respiratory, foot protectors, from our range. Our expert team will guide you in choosing your protective garment and choosing a complementary accessory with the most appropriate international standards for your working area.
 
Pre-Sales Support and Modelling
Before production, we design your protective clothing in our advanced technical drawing softwares according to your preferences and submit to your approval. Protective clothings that are purchased because of their high protection levels, but are unsuitable for the working facility may not provide adequate protection and may result in high costs for your company. Appropriate personal protective equipment should be determined as a result of risk analysis by experts. In this regard, our technical team will work in coordination with experts in your facility.
 
Standards and Certification
All our products are fully tested by notified bodies in Europe according to the relevant European standards and certified according to the relevant EN standards. In selection of protective clothings,  labels inside the suit must be examined well, labels must be printed in accordance with European standards. The information on the label must be verified with certificates. In this regard, our expert technical team will provide consultation to you valuable customers. 
 
After-Sales Support
Our company provides the necessary information, training and solutions to its customers on the maintenance, use and periodic controls of purchased products. Our company gives repair services for all standard and/or special design protective clothings that are damaged, or have worn parts. In this sense, it is aimed that the user can use the existing product for a long time instead of buying new product. 
Our sales representatives can provide training on the use of the products. All of our products are warranted against production and workmanship defects for a period of 24 months.
 
Please contact our sales department for detailed information about our services.
 
For such serious equipments, working with an experienced company that values human health and manufactures in accordance with international standards will be the right choice for your facility, your employees and your safety.

More Less

Company data

Sales volume

10-49 Mio US $

Export content

max. 50%

Number of employees

50-99

Foundation

1979

Area of business
  • Industry
  • Trade
  • Textile services
  • Person, plant and property protection
  • Other
Target groups
  • Work safety specialists (safety engineers and technicians)
  • Safety officers
  • Purchasing, procurement
  • Professional and on-site fire brigade
  • Fire and disaster prevention officers
  • Emergency and crisis management officers
  • Environmental protection officers
  • Radiation safety officers
  • Facility management

Company information as a PDF file