Manage stand orders
Select Option


Lindgesfeld 28, 42653 Solingen
Telephone +49 212 73870-0
Fax +49 212 73870-90

Hall map

A+A 2019 hall map (Hall 6): stand G24

Fairground map

A+A 2019 fairground map: Hall 6


Holger Schmalz

+49 212 73870-202


Jens Augustin

+49 212 73870-541


Please log in

You must be logged in to use matchmaking

Please log in for matchmaking

Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.

Let's get started!

Welcome to Matchmaking. Would you like to get in touch with ?

Our range of products

Product categories

  • 01  Safety at work
  • 01.01  Personal protective equipment (PPE)
  • 01.01.05  Hand protection, gloves
  • 02  Health at work
  • 02.02  First aid, rescue
  • 02.02.05  First aid, rescue

First aid, rescue

Our products

Product category: Hand protection, gloves, Knives, Tools

MARTOR safety knife SECUNORM 500

The safety knife.

Over 40 years ago the MARTOR SECUNORM PROFI set standards in safety, robustness and ergonomics. Its successor, the SECUNORM 500, goes several steps further. For example, the new aluminium handle significantly improves handling and makes cutting easier, the new slider can be operated from both sides and the blade change has been made so much simpler. Apart from these improvements, the proven automatic blade retraction will continue to protect you from cutting injuries.

More Less

Product category: Knives, Hand protection, gloves, Tools

MARTOR safety knife SECUMAX 320

COMBI reloaded. The new generation.

The MARTOR SECUMAX COMBI was always in a class of its own as a film cutting expert – until it found its legitimate successor. The new SECUMAX 320 makes an instant impression with its outstanding design. And if you look more closely, you will appreciate its inner values. For example, in comparison to its predecessor, the perfected ergonomics and the completely overhauled blade change. What about the subject of "the highest level of work safety"? It has always been in the COMBI’s DNA – and so it will remain that way.

More Less

Product category: Hand protection, gloves, Knives, Tools

MARTOR card knives

Do you need to cut in narrow spaces? Then use these cards.

MARTOR card knives have always been part of an ingenious product family – they now help you to carry out your tasks with even greater ease:
• The design is new and the handle has improved ergonomics. A new finger recess provides a firmer hold and enables the knife to be guided with greater precision.
• For the first time, our card knives are equipped with eyelets. Pull through a lanyard – and your risk of loss tends towards zero.

Users already familiar with our card knife products will not miss their tried and tested features:
• The quality blade is concealed giving you the highest level of safety and optimal protection for your packaged goods and cutting base.
• MARTOR card knives are perfect for cutting in narrow gaps and tight curves. The handle now has the flexibility to make it even more nimble and manoeuvrable.
• The blade is moulded into the plastic at an angle for the optimal cutting of paper, film, foam or textiles.

Our card knives SECUMAX POLYCUT, SECUMAX PLASTICUT, SECUMAX CARDYCUT, SECUMAX TRENNEX and SECUMAX VISICUT are available in a multitude of variants. Contact us or visit

More Less

Product category: Tools, Knives

MARTOR cutting mat

Cutting mat with self-healing capabilities. Size 620 x 870 mm.

Do you want to cut without damaging the working surface? No problem. For cutting paper, card, film etc. it is best to use a high-quality MARTOR cutting mat. The mat is made of three layers: a solid core and two resistant outer surfaces. It therefore easily tolerates even high-pressure cutting. The cutting mat always remains smooth and enables you to continue working cleanly. An added aid are the printed grids in cm and inches. MARTOR cutting mats are available in five different sizes.

More Less

Company news



16 Oct 2019


Experience the MARTOR brand and new MARTOR products from 5–8 November 2019 at the Düsseldorf A+A in Hall 6, Stand G24.
We want to make safe cutting as flexible and as simple as possible for you.

Very flexible:
In future MARTOR gives you the choice of steel and ceramic blades!
Our new ceramic blades will celebrate their world premiere at A+A 2019. The best thing is that they fit easily into our top safety knives and are a high-quality alternative to the proven steel blade.

Very simple:
The MARTOR knife families have been restructured and extended in a practical way.
For example, the SECUNORM family with automatic blade retraction. The popular knives will in future be available in different materials, with different cutting depths and with different extras. You'll then be able to find even more precisely the product that best suits your cutting needs.

The MARTOR range of safety knives is supplemented by practical accessories (e.g. new cutting mats) as well as tailor-made consulting and training services.

There’s lots to discover. We look forward to your visit!

More Less

05 Jul 2019


"Lindgesfeld 28 in Solingen-Gräfrath": Safe cutting now has a new address. After a construction period of around 18 months, MARTOR, the Solingen-based family business, market leader and specialist for high-quality safety knives, has relocated into its new headquarters.
According to Managing Director and co-owner Jan Hendricks, the new buildings are "an investment in a successful future for MARTOR and a commitment to Solingen as a location". Such a commitment is primarily down to tradition. "My wife is from Solingen and feels connected to the city, and the company is also rooted here". For these reasons, it was decided to remain in Solingen and not to relocate to a neighbouring city, "even when there were economic and planning reasons to do so", continued Jan Hendricks.

The official inauguration took place at the new company premises in a mood of family celebration. All MARTOR employees and their relatives were invited, as well as all those who, says Jan Hendricks, "have actively and positively contributed to the success of the new building project".

The new company headquarters project involved the construction of a new administration block and an innovative production building. Both are connected via a bridge to the old premises at Heider Hof 60, which is still in use. The previous administration and production sites had reached their capacity due to the company's ongoing growth and the steady increase in demand for safety knives. "It wasn't just about space but far more about having more effective production processes, an even more modern working environment for employees, and a high quality place for our customers to visit.  This has been optimally achieved by all those involved in the construction", continues Jan Hendricks.

The administration building features spacious, bright and very well equipped office and conference rooms. An "ideas workshop" provides space for creative meetings, and for short and longer breaks there are tea bars, lounge areas and a sun terrace higher up in the building. The interior design not only creates a pleasant working atmosphere, it also makes customers feel at home when they visit MARTOR. Artfully installed "industrial references" on all three floors contribute greatly to the building’s mood. The high, open ceilings, exposed concrete, large transparent glass surfaces and shiny metal shafts are just some of the features that are also found in industrial halls, logistics centres etc., that is, those places where MARTOR safety knives are usually being used.

A noticeable change has also taken place within MARTOR production. The new, clearly structured production building is equipped with new workplaces where MARTOR safety knives undergo careful assembly. New warehouse and logistics processes and mechanisation and digitalisation systems are further features of the innovative production area.

After relaunching the MARTOR brand a few years ago, the company has now also undergone geographical repositioning. But one work-in-progress remains: completion of a new showroom as a special customer service for holding external training courses and other brand events still needs time. "We are a small family-run company which strives daily to keep making progress. So there's no standing still here", says Managing Director Jan Hendricks with a smile.

More Less

About us

Company portrait

MARTOR is the international leading partner for safer cutting solutions. For more than 75 years, the family owned company based in Solingen has been combining quality with innovation to manufacture premium cutting tools for industrial and professional purposes. Today, the brand MARTOR is represented by partners and dealers in more than 70 countries all over the world.

Company information as a PDF file